Instructions for Reinforcing the Hanger of Big Fans Large Ceiling Fans

Installation of Big Fans ceiling fans requires special attention to the reinforcement of the hanger to ensure safety and efficiency during use. Here are detailed instructions:

1. Prepare the necessary tools:

• Concrete drill with suitable drill bit.
• Iron expansion screws or expansion bolts.
• Wrench, screwdriver, measuring tape and marker.
• Sturdy ladder or scaffolding.
• Personal protective equipment such as safety glasses and gloves.

2. Determine the installation location:

• Choose a central location in the room to ensure even airflow distribution.
• Ensure a safe distance between the fan blades and surrounding objects.

3. Reinforce the hanger:

• For concrete ceilings:
  • Use a drill to drill two holes in the ceiling, with a distance of 11 to 12 cm between the two holes.
  • Insert an iron expansion screw or expansion bolt into the drilled hole, then tighten it so that the hanger is securely fixed.
• For plasterboard ceilings:
  • Determine the location of the beam or purlin above the plasterboard ceiling.
  • Drill holes and use threaded rods to connect the hanger to the beam, ensuring that the hanger can withstand the weight of the fan.

4. Installing the ceiling fan:

• Attach the fan blades to the motor according to the manufacturer's instructions, making sure the screws are tightened and even.
• Hang the fan on the reinforced hanger, check the firmness and balance of the fan.
• Connect the electrical wires according to the diagram, ensuring electrical safety.

5. Check and operate:

• After installation, re-check all connections and the firmness of the fan.
• Turn on the power and test the fan at different speeds to ensure smooth and stable operation.