Skip to Content

Please give us a call.

0909 899 367

Conventional HVAC
15–25
kW per unit
Cools air at discharge point — stratification & hot spots persist
HVLS Fan
1–2
kW per fan
Moves entire air column — uniform temperature floor to ceiling
Energy Saving 60–70%
The Cooling Problem

Your HVAC Is Cooling
Empty Space

In factories and warehouses over 500m², conventional air conditioning cannot overcome thermal stratification. Hot air rises and stays trapped at ceiling level — while your HVAC runs continuously at maximum load trying to overcome physics.

🌡️

Temperature Stratification

Ceiling air in high-bay spaces can be 8–15°C hotter than floor level. HVLS fans break this stratification, enabling HVAC setpoints to be raised 4–6°C with no comfort impact.

💡

HVAC Oversizing

Most large-space HVAC systems are oversized to compensate for poor air distribution. HVLS fans eliminate the root cause — reducing HVAC capacity requirements by 30–50%.

🔧

Maintenance Cost Spiral

HVLS fans have near-zero maintenance versus the compressor servicing, refrigerant management, and filter replacement that HVAC systems demand annually.

Hamilton Air Vietnam — Industrial Cooling Solutions

Energy
Saving
HVLS Fans

Cut facility cooling costs by up to 70% without sacrificing comfort. Our HVLS fans move massive volumes of air at low speed — using less energy than a household appliance to condition spaces that defeat conventional HVAC.

70%
Energy Reduction
7.3m
Max Diameter
1,600m²
Per Fan Coverage
500+
Projects Completed
HVLS Airflow Analytics

CFD Airflow Simulation

Real-time airflow visualisation · RK2 advection algorithm · Configurable via Website Builder

Simulation is illustrative only. Actual airflow patterns depend on space geometry, obstructions and HVAC system interaction. Contact BigFans for a site-specific CFD report.

Common Questions

HVLS Fan FAQ

How much energy do HVLS fans save compared to air conditioning?

+
HVLS fans consume 1–2 kW of electricity while creating a wind chill effect equivalent to lowering the perceived temperature by 4–8°C. This allows facilities to raise thermostat settings by 4–6°C without reducing occupant comfort, reducing HVAC energy consumption by 30–70% depending on the application.

What is the difference between PMSM and BLDC motors in HVLS fans?

+
PMSM (Permanent Magnet Synchronous Motor) is a gearless direct-drive motor offering higher efficiency, lower noise, longer lifespan, and near-zero maintenance due to the absence of gears. BLDC (Brushless DC) motors are also highly efficient and digitally controlled, offering precise speed management and excellent energy performance. Both are far superior to traditional AC induction motors used in older industrial fans.

What size HVLS fan do I need for my factory or warehouse?

+
As a general rule, one 7.3m HVLS fan effectively covers approximately 1,500–2,000 m² of floor area. The optimal configuration depends on ceiling height, heat load, occupancy, and airflow patterns. Hamilton Air provides free technical surveys and airflow proposals for all industrial projects.

Are HVLS fans suitable for high-humidity or outdoor environments?

+
Yes. Hamilton Air's HERO-6 V380e Series carries IP65 protection and the HERO-6 X Series is IP68-rated, making them suitable for coastal environments, food processing plants with washdowns, high-humidity manufacturing, and partially-open industrial structures.

How long is the return on investment for HVLS fans?

+
Most industrial installations achieve full ROI within 18–36 months through reduced HVAC electricity costs, lower HVAC maintenance spend, and reduced equipment downtime from improved air circulation. For facilities operating 16–24 hours daily, ROI can be achieved in under 12 months.

Do HVLS fans work in winter or cold climates?

+
Yes. HVLS fans running in reverse (destratification mode) push warm air trapped at ceiling level back down to the floor, reducing heating costs by 20–35% in cooler months. This is especially valuable in high-ceiling warehouses and logistics facilities in Northern Vietnam during winter.

Request a CFD airflow analysis

A CFD (computational fluid dynamics) simulation models air movement in the building before installation, so that fan layouts can be compared.

Useful information for the analysis:

  • Layout and section drawings
  • Ceiling height and roof type
  • Heat sources and existing ventilation

Thank you, your request has been received.

We will contact you to agree on the scope of the analysis and the information needed.

HAMILTON AIR – SERVICES

CONTACT HAMILTON AIR

Zalo Chat Zalo Business WhatsApp WhatsApp Business Hotline Hotline 0915123860 Đặt Lịch Khảo Sát Đặt Lịch Khảo Sát Liên Hệ Tư Vấn Liên Hệ Tư Vấn